Skip to content

.1780 - .2075 Solid Carbide Reamers .0005" Increments - Straight Flute 

Solid carbide straight fluted reamers for reaming of most materials. Sizes .1120″ and smaller are provided with male centers. Above .1120″ they are provided with female centers. A reamer is used to finish machine a previously formed hole to an exact diameter with a smooth finish. It should not be used to significantly enlarge a hole (max. 5% – depending on material and hardness). Carbide tipped reamers are especially appropriate for close tolerance reaming. Because carbide is very highly resistant to wear, the reamer will produce accurate hole size and a smooth finish far longer than high speed steel or cobalt. The reamer is an end cutting tool, cutting only on the chamfer’s edge at the outside diameter of the preformed hole. The standard 45° chamfer angle provides effective cutting action for most materials.The reamers on this page are available in .0005″ incremental sizes.

Decimal DiameterFractional DiameterTool Diameter MmFlute LengthNumber Of FlutesOverall LengthWire LetterEDPPriceOrder
0.18157/842 3/498041815 $42.90
0.18207/842 3/41498041820D $40.90
0.18707/842 3/498041870 $43.35
0.18807/842 3/498041880 $45.65
0.205016398042050 $49.85
0.2055163598042055D $47.45
0.206016398042060 $49.85
0.206516398042065 $49.85
0.207016398042070 $49.85
0.207516398042075 $49.85
0.201516398042015 $49.85
0.202016398042020 $49.85
0.202516398042025 $49.85
0.203016398042030 $49.85
0.203516398042035 $49.85
0.2040163698042040D $47.45
0.204516398042045 $49.85
0.198016398041980 $48.45
0.198516398041985 $48.45
0.1990163898041990D $45.95
0.199516398041995 $49.85
0.200016398042000 $49.85
0.200516398042005 $49.85
0.2010163798042010D $47.45
0.194516398041945 $46.70
0.195016398041950 $47.90
0.195516398041955 $47.90
0.1960163998041960D $45.75
0.196516398041965 $47.90
0.197016398041970 $48.45
0.197516398041975 $48.45
0.19107/842 3/41198041910D $43.90
0.191516398041915 $46.20
0.192016398041920 $46.20
0.192516398041925 $46.20
0.193016398041930 $46.70
0.19351631098041935D $44.15
0.194016398041940 $46.70
0.18753/167/842 3/4980412D $39.45
0.18857/842 3/498041885 $45.65
0.18904.87/842 3/4129804048D $43.35
0.18957/842 3/498041895 $46.10
0.19007/842 3/498041900 $46.10
0.19057/842 3/498041905 $46.10
0.18407/842 3/498041840 $43.25
0.18457/842 3/498041845 $43.25
0.18504.77/842 3/4139804047D $41.15
0.18557/842 3/498041855 $45.50
0.18607/842 3/498041860 $45.50
0.18657/842 3/498041865 $45.50
0.18057/842 3/498041805 $42.60
0.18107/842 3/498041810 $42.65
0.18257/842 3/498041825 $43.15
0.18307/842 3/498041830 $43.15
0.18357/842 3/498041835 $43.25
0.17807/842 3/498041780 $42.30
0.17857/842 3/498041785 $42.30
0.17907/842 3/498041790 $42.30
0.17957/842 3/498041795 $42.30
0.18007/842 3/41598041800D $40.30

Can't find the Solid Carbide Reamers .0005" Increments you need?

If you cannot find the exact Reamers .0005" Increments you want to order online, we can build it specially for you. Just fill in this custom cutting tool form and fax back to Super Tool at 941-756-6480. We will let you know how we will supply the Angle Cutters you want to order. If you prefer to email it back to us fill out the Contact Us page and we will provide you with an email address to send it to.

Thank you for buying your Solid Carbide Tools at Super Tool, Inc..