Skip to content

Solid Carbide Reamers - Left Spiral Flutes - For Cast Iron & Steel - Made to Size

Solid carbide reamers with left spiral flutes for cast iron and steel. A reamer is used to finish machine a previously formed hole to an exact diameter with a smooth finish. It should not be used to significantly enlarge a hole (max. 5% – depending on material and hardness). Carbide reamers are especially appropriate for close tolerance reaming. Because carbide is very highly resistant to wear, the reamer will produce accurate hole size and a smooth finish far longer than high speed steel or cobalt. The reamer is an end cutting tool, cutting only on the chamfer’s edge at the outside diameter of the preformed hole. The standard 45° chamfer angle provides effective cutting action for most materials.

Flute LengthMax Shank DiameterNumber Of FlutesOverall LengthEDPPriceOrder
1 1/40.344363 1/2982224
1 3/80.375563 3/4982226
1 3/80.406763 3/4982228
1 1/20.438064982230
1 1/20.469364982232
7/80.156742 3/4982211
7/80.172442 3/4982212
1 1/80.250563 1/4982218
1 1/80.281763 1/4982220
1 1/40.313063 1/2982222
5/80.094342 1/4982207
5/80.109942 1/4982208
3/40.125542 1/2982209
3/40.141142 1/2982210

Can't find the Solid Carbide Reamers you need?

If you cannot find the exact Reamers you want to order online, we can build it specially for you. Just fill in this custom cutting tool form and fax back to Super Tool at 941-756-6480. We will let you know how we will supply the Angle Cutters you want to order. If you prefer to email it back to us fill out the Contact Us page and we will provide you with an email address to send it to.

Thank you for buying your Solid Carbide Tools at Super Tool, Inc..