Skip to content

Semi Finished Reamers - Taper Shank - Partial Flute Length Carbide

Tapered Shank semi-finished reamer with partial flute length carbide. Before semi-finished reamers can be used, the tool diameter must be finish ground and relieved and the reamer end must be faced and chamfered.

Tool Diameter RangeEDPPriceOrder
1.1906 - 1.253059082 $170.05
1.2531 - 1.315559083 $183.45
1.3156 - 1.378059084 $190.75
1.3781 - 1.440559085 $194.80
1.4406 - 1.503059086 $204.40
0.7841 - 0.816059072 $74.55
0.8161 - 0.847059073 $77.85
0.8471 - 0.878059074 $80.80
0.8781 - 0.909059075 $94.75
0.9091 - 0.941059076 $94.75
0.9411 - 0.972059077 $98.60
0.9721 - 1.003059078 $98.60
1.0031 - 1.066059079 $135.60
1.0661 - 1.128059080 $144.45
1.1281 - 1.190559081 $153.10
0.4721 - 0.503059062 $60.10
0.5031 - 0.534059063 $64.95
0.5341 - 0.566059064 $64.95
0.5661 - 0.597059065 $67.95
0.5971 - 0.628059066 $67.95
0.6281 - 0.659059067 $69.25
0.6591 - 0.691059068 $69.25
0.6911 - 0.722059069 $72.40
0.7221 - 0.753059070 $72.40
0.7531 - 0.784059071 $74.55
0.2381 - 0.253059054 $42.25
0.2531 - 0.284059055 $42.90
0.2841 - 0.315059056 $42.90
0.3151 - 0.347059057 $44.45
0.3471 - 0.378059058 $40.90
0.3781 - 0.409059059 $46.60
0.4091 - 0.441059060 $49.70
0.4411 - 0.472059061 $51.10

Can't find the Carbide Tipped Semi-Finished Reamers you need?

If you cannot find the exact Semi-Finished Reamers you want to order online, we can build it specially for you. Just fill in this custom cutting tool form and fax back to Super Tool at 941-756-6480. We will let you know how we will supply the Angle Cutters you want to order. If you prefer to email it back to us fill out the Contact Us page and we will provide you with an email address to send it to.

Thank you for buying your Carbide Tipped Tools at Super Tool, Inc..